2016年8月19日星期五

mining electric scraper winch from Shandong China Coal Group


chinacoal07@gmail.com
https://www.chinacoalintl.com
https://m.chinacoalintl.com/
we provide service of enterprise's customs declaration, inspection.
Rake Mine Winch,mining electric scraper,scraper winch
15KW Explosion proof Scraper Winch with MA Certification
The scraper winch is mainly used to metal, chemical, contribution and the mine etc, and the underground working, such as the transportation etc. Meanwhile, the scrape winch is just suitable to the parallel transportation on ground, or the slopes within 500; Not be the hoisting machines.
B. The main components of the winch: Deceleration device, main roll, Vice reel, control devices, wire guiding device and motor. These parts were installed inside and outside the shell, the shell is a good steel parts, both to protect the supporting role, but also to bear all the load. It is connected on the basis of two slide bolt.
Binoculars winch a master reel (mounted on the right, ie, close to the motor side), a secondary reel (mounted on the left).
A master reel (mounted in the middle) in the three-drum winch, two vice reel (mounted on the left and right), three drum winch can be mounted two main reel (mounted on the right and middle), a vice volume cylinder (mounted on the left), each roll corresponding control device and a wire rope guide.
Name
Parameter
Unit
Working pressure
0.69-1.0
MPa
Traction
8
kN
Max rope speed
32
m/min
Air motor
Rated power
7.5
kW
Rotating speed
1200
rpm
    Drum
Diameter
205
mm
Length
150
mm
Wheel flange diameter
350
mm
            Wire-rope diameter
9.3
mm
                Rope capacity
45
m
External dimension
L × W × H
920× 675× 475
mm
Working        condition
    Temperature
-10 ­ +60
° C
Humidity
100%

Wind speed & wave height
6 / 2
level/M
                        Weight
360
kg



没有评论:

发表评论