chinacoal07@gmail.com
https://www.chinacoalintl.com
https://m.chinacoalintl.com/
we provide service of enterprise's customs declaration, inspection.

mining electric scraper winch from Shandong China Coal Group

15KW Explosion proof Scraper Winch with MA Certification

The scraper winch is mainly used to metal, chemical, contribution and the mine etc, and the underground working, such as the transportation etc. Meanwhile, the scrape winch is just suitable to the parallel transportation on ground, or the slopes within 500; Not be the hoisting machines.

B. The main components of the winch: Deceleration device, main roll, Vice reel, control devices, wire guiding device and motor. These parts were installed inside and outside the shell, the shell is a good steel parts, both to protect the supporting role, but also to bear all the load. It is connected on the basis of two slide bolt.

Binoculars winch a master reel (mounted on the right, ie, close to the motor side), a secondary reel (mounted on the left).

A master reel (mounted in the middle) in the three-drum winch, two vice reel (mounted on the left and right), three drum winch can be mounted two main reel (mounted on the right and middle), a vice volume cylinder (mounted on the left), each roll corresponding control device and a wire rope guide.

Name		Parameter	Unit
Working pressure		0.69-1.0	MPa
Traction		8	kN
Max rope speed		32	m/min
Air motor	Rated power	7.5	kW
	Rotating speed	1200	rpm
Drum	Diameter	205	mm
	Length	150	mm
	Wheel flange diameter	350	mm
Wire-rope diameter		9.3	mm
Rope capacity		45	m
External dimension	L × W × H	920× 675× 475	mm
Working        condition	Temperature	-10 ­ +60	° C
	Humidity	100%
	Wind speed & wave height	6 / 2	level/M
Weight		360	kg